NOTICE: BL1: GLOBAL_STRAP 0x8880
NOTICE: BL1: Fabric Clock Speed 250 MHz
NOTICE: BL1: OTP Clock Speed 62 MHz
NOTICE: BL1: CPU Clock Speed 666 MHz
NOTICE: BL1: I/O Clock 100 MHz
NOTICE: BL1: PER Clock 125 MHz
NOTICE: Secure Boot Firmware - Cortina Access Inc.
NOTICE: BL1: v1.3(release):957a6b2
NOTICE: BL1: Built : 16:43:43, Apr 17 2018
NOTICE: boot from serial NAND flash
NOTICE: SERIAL_NAND: ID: 0x12c200
NOTICE: SERIAL_NAND: chip_id MACRONIX
NOTICE: SERIAL_NAND: Sizes - oob 0x40, page 0x800, block 0x20000
NOTICE: Platform initialized
NOTICE: BL1: Booting BL2
NOTICE: Chip Sub-Revision D
NOTICE: Saturn Soc
NOTICE: Change IO clock
NOTICE: DIAGNOSTIC_TASK ON
NOTICE: DDR3 800MHz
NOTICE: PAD_BUS_0=0x5dd80000
NOTICE: PAD_CTRL_PROG=0xc000000
NOTICE: rzq_480code:0x9
NOTICE: # PAD_ZCTRL_STATUS: 0x800a8576 ==> NOTICE: TTCN[TTFN]=0x5[0x0]; [CPMSB,TTCP][TTFP]=0x0,0x5[0x1]
NOTICE: # PAD_ZCTRL_STATUS: 0x80091276 ==> NOTICE: TTCN[TTFN]=0x2[0x1]; [CPMSB,TTCP][TTFP]=0x0,0x2[0x1]
NOTICE: WriteLeveling PI of DRAM_CK moved 0 tick
NOTICE: ddr_write_leveling: 0
NOTICE: ddr_write_leveling: 1001
NOTICE: ddr_ck_training:DIAG_ID=2: PLL_PI0 starting value 0x1010200
NOTICE: ddr_ck_training:DIAG_ID=2: PLL_PI1 starting value 0x40808
NOTICE: ddr_ck_training:FREQ=800; DIAG_ID=2: going left 13 ticks; going right 14 ticks
NOTICE: ddr_wr_data_training: min_reg_pi_dq[0]: 3; max_reg_pi_dq[0]: 13
NOTICE: ddr_ck_training:DIAG_ID=3: PLL_PI0 starting value 0x1010200
NOTICE: ddr_ck_training:DIAG_ID=3: PLL_PI1 starting value 0x40707
NOTICE: ddr_ck_training:FREQ=800; DIAG_ID=3: going left 13 ticks; going right 14 ticks
NOTICE: ddr_dqs_gating: dqs_en gating trained as: 2
NOTICE: ddr_dqs_gating: dqs_en gating trained as: 2
NOTICE: ddr_ck_training:DIAG_ID=4: PLL_PI0 starting value 0x1010200
NOTICE: ddr_ck_training:DIAG_ID=4: PLL_PI1 starting value 0x40707
NOTICE: ddr_ck_training:FREQ=800; DIAG_ID=4: going left 13 ticks; going right 14 ticks
NOTICE: rising_dqs_in_dly[0]: 0~31=15
NOTICE: rising_dqs_in_dly[1]: 0~31=15
NOTICE: rising_dqs_in_dly[2]: 0~31=15
NOTICE: rising_dqs_in_dly[3]: 0~31=15
NOTICE: falling_dqs_in_dly[0]:0~28=14
NOTICE: falling_dqs_in_dly[1]:0~29=14
NOTICE: falling_dqs_in_dly[2]:0~29=14
NOTICE: falling_dqs_in_dly[3]:0~29=14
NOTICE: rising_dqs_in_dly[4]: 0~31=15
NOTICE: rising_dqs_in_dly[5]: 1~31=16
NOTICE: rising_dqs_in_dly[6]: 0~31=15
NOTICE: rising_dqs_in_dly[7]: 0~31=15
NOTICE: falling_dqs_in_dly[4]:0~29=14
NOTICE: falling_dqs_in_dly[5]:0~30=15
NOTICE: falling_dqs_in_dly[6]:0~29=14
NOTICE: falling_dqs_in_dly[7]:0~29=14
NOTICE: rising_dqs_in_dly[8]: 1~31=16
NOTICE: rising_dqs_in_dly[9]: 0~31=15
NOTICE: rising_dqs_in_dly[10]: 1~31=16
NOTICE: rising_dqs_in_dly[11]: 0~31=15
NOTICE: falling_dqs_in_dly[8]:0~30=15
NOTICE: falling_dqs_in_dly[9]:0~29=14
NOTICE: falling_dqs_in_dly[10]:0~30=15
NOTICE: falling_dqs_in_dly[11]:0~29=14
NOTICE: rising_dqs_in_dly[12]: 0~31=15
NOTICE: rising_dqs_in_dly[13]: 0~31=15
NOTICE: rising_dqs_in_dly[14]: 0~31=15
NOTICE: rising_dqs_in_dly[15]: 0~31=15
NOTICE: falling_dqs_in_dly[12]:0~29=14
NOTICE: falling_dqs_in_dly[13]:0~28=14
NOTICE: falling_dqs_in_dly[14]:0~30=15
NOTICE: falling_dqs_in_dly[15]:0~29=14
NOTICE: ddr_ck_training:DIAG_ID=5: PLL_PI0 starting value 0x1010200
NOTICE: ddr_ck_training:DIAG_ID=5: PLL_PI1 starting value 0x40707
NOTICE: ddr_ck_training:FREQ=800; DIAG_ID=5: going left 13 ticks; going right 14 ticks
NOTICE: DDR Size: 128MB
NOTICE: Start DDR scan ...
NOTICE: DDR scan done
NOTICE: DDR Init done...
NOTICE: Recover io_clk...
NOTICE: Reduce Power for SFU
NOTICE: boot from serial NAND flash
NOTICE: SERIAL_NAND: ID: 0x12c200
NOTICE: SERIAL_NAND: chip_id MACRONIX
NOTICE: SERIAL_NAND: Sizes - oob 0x40, page 0x800, block 0x20000
NOTICE: BL2: v1.3(release):0e4fa4b
NOTICE: BL2: Built : 08:52:24, Jun 29 2020
U-Boot 2015.04 (Aug 22 2022 - 14:54:39) Saturn-ASIC
CIG XGS-PON Boot Version: 1.0.0
DRAM: 128 MiB
SPI NAND: MX35LF1GE4AB (0xc212)
spare: 0x40 (64B)
page: 0x800 (2KB)
block: 0x20000 (128KB)
chip: 0x8000000(128MB)
Mode: 4/4
SPI NAND: MX35LF1GE4AB (0xc212)
spare: 0x40 (64B)
page: 0x800 (2KB)
block: 0x20000 (128KB)
chip: 0x8000000(128MB)
Mode: 4/4
crc1,2 ret is 0 0 value is 0x997437a8 0x997437a8,flag is 1 1
To detect 5s reset.(183)
To detect 5s reset end.(184)
SPI NAND: MX35LF1GE4AB (0xc212)
spare: 0x40 (64B)
page: 0x800 (2KB)
block: 0x20000 (128KB)
chip: 0x8000000(128MB)
Mode: 4/4
done
Valid environment: 2
done
Valid environment: 1
[ 0.383504] console [ttyS0] enabled
[ 0.390362] bootconsole [early0] disabled
[ 0.398766] b2224178.uart: ttyS1 at I/O 0x0 (irq = 20, base_baud = 7812500) is a Cortina UART1
[ 0.407945] IPC: host cpu is PE0 , thisCPU=0x1
[ 0.412367] IPC: list physical start from: 0x2810000
[ 0.417320] IPC: list virtual start from: 0xa2810000
[ 0.422219] IPC: list size: 0x4800
[ 0.425714] IPC: Debug:...Clearing memory.... from 0xa2811800
[ 0.431377] IPC: version is 100
[ 0.434500] IPC: irq = 24
[ 0.437117] CA_IPC:register succesfull:session_id[8] session 87ca3c80 msg_count 3
[ 0.437117]
[ 0.446433] ca_pelog_probe
[ 0.449013] pelog0: shm physical address : 0x2800000
[ 0.453968] pelog0: shm virtual address : 0xa2800000
[ 0.458878] pelog0: shm size: 0x1000
[ 0.462452] pelog1: shm physical address : 0x2801000
[ 0.467405] pelog1: shm virtual address : 0xa2801000
[ 0.472344] pelog1: shm size: 0x1000
[ 0.476399] ca_sflash b2223000.sflash: Cortina-Access Serial Flash driver
[ 0.483095] Serial flash: indirect/direct access mode
[ 0.488080] Serial flash type : 0x8000
[ 0.491926] ca_jedec_probe : unrecognized JEDEC id 00c212
[ 0.497314] ca_sflash: probe of b2223000.sflash failed with error -5
[ 0.503921] ca_set_mux: group:98 reg_off:0 bit_off:18
[ 0.508840] ca_spi_nand b2223000.spi-nand: Cortina-Access SPI-NAND Flash driver
[ 0.516164] SPI-NAND io-mode:a00
[ 0.520331] SPI-NAND flash mfr-name: Macronix, mdr_id: 0xc2, dev_id: 0x12
[ 0.529974] spi_nand_base: SPI-NAND: MX35LF1GE4AB is found.
[ 0.535887] Bad block table found at page 65472, version 0x01
[ 0.541880] Bad block table found at page 65408, version 0x01
[ 0.547980] 12 cmdlinepart partitions found on MTD device ca_spinand_flash
[ 0.554713] Creating 12 MTD partitions on "ca_spinand_flash":
[ 0.560433] 0x000000000000-0x000000400000 : "ssb"
[ 0.566297] 0x000000400000-0x000000500000 : "uboot-env"
[ 0.572408] 0x000000500000-0x000000600000 : "dtb0"
[ 0.578236] 0x000000600000-0x000000c00000 : "kernel0"
[ 0.584278] 0x000000c00000-0x000003400000 : "rootfs0"
[ 0.590287] 0x000003400000-0x000003500000 : "dtb1"
[ 0.596093] 0x000003500000-0x000003b00000 : "kernel1"
[ 0.602043] 0x000003b00000-0x000006300000 : "rootfs1"
[ 0.608170] 0x000006300000-0x000007700000 : "userdata"
[ 0.614387] 0x000007700000-0x000007800000 : "mfginfo1"
[ 0.620430] 0x000007800000-0x000007900000 : "mfginfo2"
[ 0.626575] 0x000007900000-0x000007a00000 : "uboot-env2"
[ 0.633206] spi-ca77xx b2224098.spi: resource - [mem 0xb2224098-0xb22240d7 flags 0x200] mapped at 0xb2224098
[ 0.642943] spi-ca77xx b2224098.spi: irq 23
[ 0.647779] spi-ca77xx b2224098.spi: chipselect 0 already in use
[ 0.653687] spi_master spi32766: spi_device register error /spi@b2224098/voicepath_spi0@0
[ 0.661802] spi_master spi32766: Failed to create SPI device for /spi@b2224098/voicepath_spi0@0
[ 0.670628] i2c /dev entries driver
[ 0.674204] ca77xx-i2c b2224120.i2c: resource - [mem 0xb2224120-0xb2224147 flags 0x200] mapped at 0xb2224120
[ 0.683938] ca77xx-i2c b2224120.i2c: invalid timeout on /i2c@b2224120
[ 0.690305] ca77xx-i2c b2224120.i2c: invalid retries on /i2c@b2224120
[ 0.696780] ca77xx-i2c b2224120.i2c: irq 41
[ 1.051728] cortina_thermal bc10017c.thermal: SoC Temperature= 55
[ 1.058433] Synopsys Designware Multimedia Card Interface Driver
[ 1.066466] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.071707] NET: Registered protocol family 17
[ 1.076144] 8021q: 802.1Q VLAN Support v1.8
[ 1.082809] ubi0: attaching mtd4
[ 1.303043] random: nonblocking pool is initialized
[ 1.354201] ubi0: scanning is finished
[ 1.369180] ubi0: attached mtd4 (name "rootfs0", size 40 MiB)
[ 1.374820] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.381634] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.388418] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.395367] ubi0: good PEBs: 320, bad PEBs: 0, corrupted PEBs: 0
[ 1.401356] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.408576] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 883191580
[ 1.417609] ubi0: available PEBs: 197, total reserved PEBs: 123, PEBs reserved for bad PEB handling: 20
[ 1.427167] ubi0: background thread "ubi_bgt0d" started, PID 48
[ 1.434420] ALSA device list:
[ 1.437231] No soundcards found.
[ 4.190751] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
[ 4.202888] devtmpfs: mounted
[ 4.206453] Freeing unused kernel memory: 212K
INIT: version 2.88 booting
[ 5.562694] ubi1: attaching mtd8
[ 5.697071] ubi1: scanning is finished
[ 5.711765] ubi1: attached mtd8 (name "userdata", size 20 MiB)
[ 5.717503] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.724316] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.731085] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.738042] ubi1: good PEBs: 160, bad PEBs: 0, corrupted PEBs: 0
[ 5.744037] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.751243] ubi1: max/mean erase counter: 309/192, WL threshold: 4096, image sequence number: 1877387500
[ 5.760719] ubi1: available PEBs: 0, total reserved PEBs: 160, PEBs reserved for bad PEB handling: 20
[ 5.770127] ubi1: background thread "ubi_bgt1d" started, PID 67
UBI device number 1, total 160 LEBs (20316160 bytes, 19.4 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[ 5.817690] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 76
[ 5.874375] UBIFS (ubi1:0): recovery needed
[ 6.011890] UBIFS (ubi1:0): recovery completed
[ 6.016316] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "userdata"
[ 6.023760] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.033655] UBIFS (ubi1:0): FS size: 15998976 bytes (15 MiB, 126 LEBs), journal size 2920448 bytes (2 MiB, 23 LEBs)
[ 6.044075] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
[ 6.049897] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EC112DFE-8893-43D5-BFCC-55A35A31B801, small LPT model
Starting udev
[ 6.528720] udevd[87]: starting version 3.1.5
[ 7.179649] ubi1 error: ubi_open_volume: cannot open device 1, volume 0, error -16
[ 7.193732] ubi1 error: ubi_open_volume: cannot open device 1, volume 0, error -16
[ 7.477379] cig_kvos: loading out-of-tree module taints kernel.
[ 7.554298] ca-log: init calog-ioctl-dev OK (max_level 9, default_level 4)
[ 7.563492] ca-pal: init ca_pal_ioctl OK
[ 7.571296] ca-peri:hw_timer irq 22 install
[ 7.600041] CIG GPIO LEDs Init.
[ 7.603333] ca_set_mux: group:6 reg_off:8 bit_off:6
[ 7.608053] ca_set_mux: group:7 reg_off:8 bit_off:7
[ 7.612917] ca_set_mux: group:9 reg_off:8 bit_off:9
[ 7.617826] ca_set_mux: group:c reg_off:8 bit_off:c
[ 7.622673] CIG GPIO LED module init.
[ 7.626315] ###########Init LED led, /leds/led@0, <NULL>.
[ 7.631683] ############Get GPIO DESC opt-led.
[ 7.636149] ca_pmx_request_gpio: offset:9 reg_off:8 bit_off:9
[ 7.641858] ###########Init LED led, /leds/led@1, <NULL>.
[ 7.647245] ############Get GPIO DESC alarm-led.
[ 7.651850] ca_pmx_request_gpio: offset:c reg_off:8 bit_off:c
[ 7.657587] ###########Init LED led, /leds/led@2, <NULL>.
[ 7.662959] ############Get GPIO DESC pwr-led.
[ 7.667410] ca_pmx_request_gpio: offset:7 reg_off:8 bit_off:7
[ 7.673137] ###########Init LED led, /leds/led@3, <NULL>.
[ 7.678510] ############Get GPIO DESC pwrg-led.
[ 7.683046] ca_pmx_request_gpio: offset:6 reg_off:8 bit_off:6
[ 7.688883] Init ret:0.
[ 7.730279] ubi1 error: ubi_open_volume: cannot open device 1, volume 0, error -16
[ 7.737769] nvram_nand_init_ca[411]:ca1:0,ca2:0
[ 7.742214] nvram_nand_init_ca 423 :get CA part2 [mtd10] failed
[ 7.764974] nvram_nand_read 195
[ 7.768046]
[ 7.769557] nvram_nand_eeprom_valid_check: chksum 0x45b7f395 ntohl(chksum) 0x95f3b745 calc 0x45b7f395 len 0x000000ec crc_ok 1
[ 7.780851] gEepMajor: 0xea ,gEepMinor: 0x1
[ 7.798313] nvram_nand_read 195
[ 7.801376]
[ 7.802870] nvram_nand_eeprom_valid_check: chksum 0x45b7f395 ntohl(chksum) 0x95f3b745 calc 0x45b7f395 len 0x000000ec crc_ok 1
[ 7.814190] gEepMajor: 0xea ,gEepMinor: 0x1
[ 7.818321] nvram_nand_init_ca 436 :cnvram_nand_init_ca OK!
[ 7.823900] expanded_io_init ip_port_list[i].major =0xff,ip_port_list[i].minor=0xff
[ 7.831525] expanded_io_init ip_port_list[i].major =0xff,ip_port_list[i].minor=0xff
[ 7.839177] expanded IOs init successful!
ln: /etc/resolv.conf: Read-only file system
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Configuring network interfaces... done.
hwclock: can't open '/dev/misc/rtc': No such file or directory
Start ca-app ... done.
/sbin/setup.sh: line 5: syslogd: not found
ifconfig: SIOCGIFFLAGS: No such device
/
tm->c_cc: 3 28 127 21 1 0 0 0 17 19 26 0 18 15 23 22 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ONT>
Update timer: curTime=00002ba2, gTmrTimerMsCounter=00000000
Starting Application: 0x00002000, /usr/bin/TimerMgr................Done. elapsed time:(1023)ms
Starting Application: 0x00001000, /usr/bin/LogMgr................Done. elapsed time:(1029)ms
para address is 0x7fc5127a 0x7fc51278
Nov 10 2022 ptmp is 0x7fc51193
mmr_EepCfgSetMember 827 VALUE set 0
##Nov 10 2022 ptmp is 0x7fc51193
mmr_EepCfgSetMember 857 VALUE set 0
mmr_LoadEepData() 3202, normal load eep data
mmr_EepApiReadCertFile 552
Sync 0x10009, msg no reply, dest MMR, VOS_SendSyncMsg:2110
Starting Application: 0x00007000, /usr/bin/MiscMgr................VOS_SendSyncMsg:2119 Recv sync response failed
Sync 0x10009, msg no reply, dest MMR, VOS_SendSyncMsg:2110
VOS_SendSyncMsg:2119 Recv sync response failed
[ 25.438492] sdk ioctl init success
[ 26.390880] kioctl init success
Configuring network interfaces... ifup: interface lo already configured
done.
Done. elapsed time:(13569)ms
starting to upgrade /etc/00ea_01_01
newver :1048930 oldver:1048930
UBI device number 2, total 320 LEBs (40632320 bytes, 38.8 MiB), available 204 LEBs (25903104 bytes, 24.7 MiB), LEB size 126976 byte)
ssp_SetupProductInfo() 79, major ID[0xea] minor ID[0x1]
offset is 0x0,length is 0x530c
cp: can't create 'sync/runtime_rg.xml': No such file or directory
cp: can't stat '/mnt/rwdir2/runtime_rg.xml.tmp': No such file or directory
cp: can't stat ';': No such file or directory
mv: can't rename '/mnt/rwdir2/runtime_rg.xml.tmp': No such file or directory
mv: can't rename '/mnt/rwdir2/runtime_rg.xml': No such file or directory
mv: can't rename ';': No such file or directory
cp: can't create 'sync/.md5': No such file or directory
cp: can't stat '/mnt/rwdir2/.md5.tmp': No such file or directory
cp: can't stat ';': No such file or directory
mv: can't rename '/mnt/rwdir2/.md5.tmp': No such file or directory
mv: can't rename '/mnt/rwdir2/.md5': No such file or directory
mv: can't rename ';': No such file or directory
VOS_XML_Init():
Load XML OK from file /mnt/rwdir/runtime_rg.xmlVOS_XML_Init():
Load XML OK from file /tmp/default_rg.xmlVOS_XML_Init():
Load XML OK from file /tmp/runtime_rg.xmlVOS_XML_Init():
Load XML OK from file /tmp/runtime_rg.xmldata crc 0x59e2ded8,org_crc 0x59e2ded8,img_size 0x42f290
find last leb pnum 94 addr 12320768 ok
mmr_EepCfgSetMember 827 VALUE set 0
mmr_LoadEepData() 3202, normal load eep data
mmr_EepCfgSetMember 857 VALUE set 0
mmr_LoadEepData() 3202, normal load eep data
Starting Application: 0x00003000, /usr/bin/MecMgr................Done. elapsed time:(2171)ms
Starting Application: 0x00004000, /usr/bin/PonMgr................Done. elapsed time:(1029)ms
VOS_RegisterEventListener:2995, Init event socket 5
vos_OnKernelEvent:2916, Start receving event on socket 5
Starting Application: 0x00009000, /usr/bin/NetMgr................Done. elapsed time:(1030)ms
Starting Application: 0x00005000, /usr/bin/EthMgr................Done. elapsed time:(1024)ms
217be7b:Exit SSP -->ssp, msg 0x50000,elapsed time:24054 ms
[ 35.504122] pon_kobj_init /sys/ont_pon/pon/hw,5
[ 35.508518] pon_kobj_init /sys/ont_pon/pon/debug,23
[ 35.513566] pon_kobj_init /sys/ont_pon/pon/misc,12
[ 35.518240] pon_kobj_init /sys/ont_pon/pon/ca,2
killall: dropbear: no process killed
Unkown pwd type 0
Starting Application: 0x0000c000, /usr/bin/WebMgr................Done. elapsed time:(1089)ms
23b9b00:Exit MEC -->ssp, msg 0x10012,elapsed time:1089 ms
INFO: ALL APPs are ready.
23c1d89:Exit EMR -->mec, msg 0xc0000,elapsed time:2172 ms
offset is 0x0,length is 0x530c
